Color matching and color selection is an everyday occurrence at design studios, do-it-yourself hardware stores, fabric shops, flooring and furniture stores. Color samples from walls, floors, and furniture are often brought to these locations to help make critical color decisions. The human mind cannot accurately remember subtle differences among colors so bringing color samples to the stores is meant to eliminate mistakes. If,Increase the performance and visual appearance of your headlights with hid lights and bulbs. however,Energy efficient High Quality LED Spotlight strip kits bring an urban glow to your bar that looks incredible. the lighting in the store does not match the lighting in the home, mistakes will happen. The color of the samples in the store will look different than they appear in their natural environment. 

In a survey, over 95% of the participants correctly chose natural daylight as the best lighting for matching colors but when asked for an explanation, most did not know the answer. Part of the answer is daylight is the main source of illumination during the day.Take your home design to the next level of chic with contemporary and modern lighting fixtures. The other part of the answer is that natural daylight contains all the colors of the rainbow allowing the human eye, still more sensitive than any electronic device, the ability to see colors accurately. 

So when we see colors lit by daylight, the blues, greens, yellows, oranges, and reds are evenly rendered and represented in a true and natural fashion. Artificial light sources on the other hand, such as fluorescent lights, do not render colors equally. All fluorescent sources have a large green spike in their spectrum as well as blue and red spikes. Colors rendered under fluorescent lights often look too green while the other colors appear faded and washed out. There are some fluorescent sources that claim to simulate daylight and incandescent light. Looking at their spectrum tells another story.The world’s most efficient and cost effective solar street lighting? These light sources still have the same spikes as traditional fluorescent sources with varying amounts of blue and red. The same problems occur with metal halides and LEDs. The only other light sources that are void of spikes are incandescent and halogen. 

The ColorView Lighting System provides both natural daylight and incandescent light with an added bonus. The user can combine the two lighting conditions to see how the colors change as the day progresses. ColorView provides a time lapse picture of how colors change throughout the day. Because ColorView provides the two light sources that emit a continuous visible spectrum, color matches performed with ColorView will match under any and all lighting conditions including fluorescent, metal halide, and LEDs. The opposite is not true. If colors match under fluorescent, metal halide,Our led spotlight bulbs are cost effective and energy efficient. or LEDs, they will not necessarily match under daylight or incandescent. 

This point was recently driven home when Kevin McGuire, inventor of the ColorView Lighting System, was in a major hardware retailer near his home in Western New York. A clerk in the paint department was remixing a gallon of paint for a customer that had just returned it because the color did not look right when he applied it to his wall. When asked why the color was wrong the clerk replied that the lighting in the store was terrible for matching colors and the lights provided in a chip rack that claimed to provide "daylight", "fluorescent", and "incandescent" did not seem to help. Upon inspecting the chip rack, Mr. McGuire discovered all three light sources were fluorescent. The reason for the paint return was clear, the clerk did not have the proper tools to serve her customer resulting in a hit or miss technique. Click on their website www.aulaundry.com for more information.